If you’re looking for products to help create the perfect manicure, it’s well worth checking out the Polish Pro range offered by NSI UK. Polish Pro products boast a light-cured polish formula that lasts for two weeks without smudging, cracking or chipping. In addition, the polish can be dried in a matter of minutes under a UV or LED lamp, meaning customers are able to walk away with fabulous nails in under 20 minutes. To achieve the best results, follow these simple steps:
Preparing nails
You should never apply new product before you’re 100 per cent satisfied that your nails are properly prepared. To do this, remove any existing polish with a cotton bud and nail polish remover. You should then exfoliate the hands before soaking them in a bowl of lukewarm water. This will soften the skin and make the nails more flexible.
After drying the hands on a soft towel, it’s time to shape them. Before you set to work with a file and clippers, define which shape and length of nail you require. To make the nails look longer and more elegant, gently push back the cuticles. This process is easier if use Vanish Cuticle Dissolve, which is a cuticle exfoliant and moisturiser. Before you continue, remove any leftover Vanish with a nail wipe saturated with Cleanse. This product removes surface oils and improves adhesion.
Applying the polish
It’s then time to begin applying the polish. Firstly, you should use a very thin layer of Polish Pro Base Coat. Apply this to all the nails and make sure you cap the edges. Ideally, you’ll then cure the nails for 10 seconds using a 36-watt UV bonding lamp. If you don’t have this piece of kit, the curing process will take longer.
Once the base coat is dry, you can apply a thin layer of Polish Pro in whichever colour your customer has selected. Make sure you cap the edges as you work. This layer should be so thin that it appears translucent. Cure the nails for two minutes before applying a second thin layer and curing for a further two minutes. Once you’re sure the nails are fully cured, it’s time to add a thin layer of Polish Pro Top Coat. This also takes two minutes to cure under a UV lamp.
Finishing touches
By this stage, your nails should look amazing, but your work’s not quite finished yet. For the best results, it’s important to remove the tacky layer using Cleanse and you may also want to pamper by using a drop of Nurture Oil to condition the cuticles. This product contains a blend of jojoba, soy, safflower, grape seed oils and wheat germ and it helps to prolong the flexibility and durability of nail enhancements.
Removal
One of the great things about Pro Plus nail polish products is the fact that they soak off, removing the need for scrubbing using harsh chemicals. To get rid of the product, lightly buff the surface of the polish to remove the shine. Next, pour a small amount of acetone into a bowl of water (just enough to cover the nails) and soak the fingers for around ten minutes. The layers of polish should then come away quickly and easily. Then all that’s left is to wash the hands and moisturise them. As long as you follow the right procedure, using Pro Plus products they provide professional manicures that gives a wow factor.
No comments
Post a Comment
Thank you for Commenting!